Archives

Why Is There An Odor From My Newly Installed Cooler Pad?

When a new Rigid Cooling Media pad is installed in evaporative coolers, there is usually a slight odor emitted.
This slight odor will dissipate and be gone after a short period of time.

When these pads are first wet out a slight odor may occur from the dust created when the pad is manufactured and cut to size.

THIS ODOR IS NOT TOXIC OR HARMFUL.

The operation of this type cooling pad requires a wet out period (typically several hours without airflow) followed by draining and refilling the sump water pan. This will remove the small amount of residue in the media that would be the source of the odor. This operation may have to be repeated on larger systems that do not drain completely.

All evaporative cooling systems have odor problems related to the system cleanliness. This is how ‘swamp coolers’ first got its name. When left UN-cleaned, they would start to smell like a swamp. All cooling media require cleaning, both initially, and ongoing. All cooling pads of this type are manufactured using the same base resin materials and have the same odor associated with them. All new cooler pads have a ‘new pad’ odor that dissipates with use. Once the pads are ‘broken in’, this odor will disappear. The once active ingredients in the paper of the cooling pad are rendered inert during the manufacturing processing, however, the odor from these materials lingers until the pads are washed clean by the wetting process after installation.

Click Here For:
Installation Instructions

AeroCool Cooler Pads

RIGID MEDIA COOLING PADS

THE ULTIMATE COOLING MEDIA
FOR SINGLE INLET COOLERS
Long Life – High Air Velocity – Energy Efficient
Consistent Performance50% heavier paper holds more water and lasts longer
Independent lab and field tests verify the highest efficiency
Fast wet-outEngineered for optimal performance and longevity…Cellulose base impregnated with plastic resins and anti-rot agents…Durable and easy to install.
Celdek Pads
Rigid Cooling Media Pad
Pad is not one piece
Comes in Sections
2 – 4 sections per set
to make correct width8″ & 12″ Thick Pads
The Most Efficient type of
Cooler Pad Made
Visit the Order Info Page to Order!
Email For Special Quote on Very Large Quantities

Other Sizes Available
Including 12″ Thickness

Free Shipping/Handling included in Price

AeroCool Pads
Click Here For:
Installation Instructions

8″ Thick
Pad

P/N 3437
40 x 23 x 8
AeroCool 4800

$128 Total Cost

Free Shipping

8″ Thick
Pad
P/N 3439
40 x 30 x 8
AeroCool 6800
$158 Total Cost

Free Shipping

AeroCool Window Cooler Model
BW 5500 Brisa

 Note:
New Rigid Cooling Media Pad type pads will emit a slight odor when first installed
Click Here To See Why

MasterCool Cooler Pads

RIGID MEDIA COOLING PADS

WE HAVE MOST ALL SIZES OF RIGID MEDIA PADS ~ EVEN IF NOT LISTED

CALL OR EMAIL FOR PRICING ON SIZES NOT LISTED

THE ULTIMATE COOLING MEDIA FOR SINGLE INLET COOLERSLong Life – High Air Velocity – Energy Efficient

Consistent Performance

50% heavier paper holds more water and lasts longer
Independent lab and field tests verify the highest efficiency
Fast wet-out

Engineered for optimal performance and longevity…Cellulose base impregnated with plastic resins and anti-rot agents…Durable and easy to install.

Celdek Pads
Rigid Cooling Media Pad
Pad is not one piece
Comes in Sections
2 – 4 sections per set
to make correct width8″ & 12″ Thick Pads
The Most Efficient type of
Cooler Pad Made

Free Shipping/Handling included in Price

MasterCool Window View Cooler Pads

MasterCool
MW 5500 Window View


Pad is not one piece.
(4 PCS) 10″ x 26 1/8″ x 3″ Sections

3″ Thick
Pad
P/N 3436
(4 pcs – 10 x 26 1/8 x 3)
MasterCool
Window View Pad
MW 5500

$150 Total Cost

Free Shipping

MasterCool Pads For Down Draft & Side Draft
Residential Coolers

Free Shipping/Handling included in Price

OTHER PAD SIZES AVAILABLE  ~ CALL OR EMAIL IF YOUR PAD SIZE ISN’T LISTED

Click Here For:
Installation Instructions

8″ Thick
Pad
P/N 3437
40 x 23 x 8
MasterCool
Fits EC 430 – EC 440
MC 43 – MC 44
PM 100
$128 Total Cost

Free Shipping

8″ Thick
Pad
P/N 3438
40 x 28 x 8
MasterCool
Fits EC 630 – EC 640
MC 63 – MC 64
PM 200
$136 Total Cost

Free Shipping

12″ Thick
Pad
P/N 3452
40 x 23 x 12
MasterCool
Fits HPC 430 – HPC 440
HC 43 – HC 44
PM 120
$230 Total Cost

Free Shipping

12″ Thick
Pad
P/N 3453
40 x 28 x 12
MasterCool
Fits HPC 630 – HPC 640
HC 63 – HC 64
PM 220
$235 Total Cost

Free Shipping

Industrial Model MasterCool Pads

WE HAVE OTHER PAD SIZES AVAILABLE  

 CALL OR EMAIL IF YOUR PAD SIZE ISN’T LISTED

Pads Below Are Too Large To Be Shipped via UPS
They Must Be Shipped via Common Freight Carrier

Freight Collect
Shipping Can Range From $70 to $200

Free Shipping For Quantities Show Below
To The Following States Only:
AZ, CA, CO, ID, KS, MT, NM, NV, OK, OR, TX, UT, WY

Email For Special Quote on Very Large Quantities

Or visit the order info page!

Note: Two Pads Required For Dual Inlet Coolers
(Models MD 628 – MS 628 – MU 628)

One Pad Required For Single Inlet Coolers
(Models MD 524 – MS 524 – MU 524)

8″ Thick
Pad
P/N 3460
40 x 37 3/4 x 8
MasterCool
PM 300

One Pad Set
$222
Plus Shipping

Two Pad Sets
$424
Plus Shipping
Free Shipping
on Four or more

8″ Thick
Pad
P/N 3461
48 x 44 5/8 x 8
MasterCool
PM 400
One Pad Set
$283
Plus Shipping
Two Pad Sets
$546
Plus Shipping
Free Shipping
on Three or more  
12″ Thick
Pad
P/N 3465
48 x 44 5/8 x 12
MasterCool
PM 500
One Pad Set
$400
Plus Shipping
Two Pad Sets
$780
Free Shipping  

Note: Two Pads Required For Dual Inlet Coolers
(Models MD 628 – MS 628 – MU 628)

One Pad Required For Single Inlet Coolers
(Models MD 524 – MS 524 – MU 524)
Click Here For:
Installation Instructions

Evaporative Swamp Cooler Replacement Parts

For Nearly All Brands of Evaporative Swamp Coolers
Motors, Pumps, Aspen Pads, Floats, Pulleys, Bearings, Cooler Covers,
MasterCool Pads, UltraCool Pads, AeroCool Pads
Most Commonly Used Replacement Evaporative Swamp Cooler Parts
Are Available From Us

 

UltraCool Cooler Pads

RIGID MEDIA COOLING PADS

THE ULTIMATE COOLING MEDIA
FOR SINGLE INLET COOLERS
Long Life – High Air Velocity – Energy Efficient
Consistent Performance50% heavier paper holds more water and lasts longer
Independent lab and field tests verify the highest efficiency
Fast wet-outEngineered for optimal performance and longevity…Cellulose base impregnated with plastic resins and anti-rot agents…Durable and easy to install.
Celdek Pads
Rigid Cooling Media Pad
Pad is not one piece
Comes in Sections
2 – 4 sections per set
to make correct width8″ & 12″ Thick Pads
The Most Efficient type of
Cooler Pad Made
Visit the Order Info Page to Order!

Email For Special Quote on Very Large Quantities

Free Shipping/Handling included in Price

WE HAVE OTHER SIZES ALSO ~ EMAIL OR CALL IF YOUR PAD SIZE ISN’T LISTED


Click Here For:
Installation Instructions

8″ Thick
Pad

P/N 3440
41 1/4 x 22 1/2 x 8
UltraCool
ADA 50 or ASA 50 or AUA 50

$126 Total Cost
Free Shipping
8″ Thick
Pad
P/N 3441
41 1/4 x 29 x 8
UltraCool
ADA 70 or ASA 70 or AUA 70
$138 Total Cost
Free Shipping
12″ Thick
Pad
P/N 310108
(Champion Mfg Part)
41 1/4 x 22 1/2 x 12
UltraCool
ADA 5012 or ASA 5012
$260 Total Cost
Free Shipping
12″ Thick
Pad
P/N 310109
(Champion Mfg Part)
41 1/4 x 29 x 12
UltraCool
ADA 7012 or ASA 7012

$290 Total Cost
Free Shipping  

 

 Note:
New Rigid Cooling Media Pad type pads will emit a slight odor when first installed
Click Here To See Why

 

Aspen Cooler Rolls

Aspen Cooler Rolls

Price Does Not Include Shipping/Handling

Visit the Order Info Page to Order!
Email For Special Quote on Very Large Quantities

* Please Note, There Is A $25 Minimum Charge For Cooler Parts Orders

Aspen Pad Rolls
Aspen Pad Rools
Made with shredded aspen wood
Cut to Size – Swells to fill pad frame when wet 
Pad
P/N
Width & Length
Bundle
Quantity
Bundle
Weight
Cost
Each
S/H Not Included in Pad Price
20 AR
20″ x 24′
1
13
$29 each
24 AR
24″ x 24′
1
16
$33 each

Note: SHIPPING COSTS
UPS Dimensional & Oversize Weight Charged For Sizes Below
Depending on Your Zip Code
Shipping Can Cost As Much (OR MORE) As Product

28 AR
28″ x 24′
1
18
$39 each
30 AR
30″ x 24′
1
19
$40 each
36 AR
36″ x 24′
1
23
$50 each
Pad Retaining Wire
Replacement Pad Frame Retaining Wires
$25 ( Pkg of Five)
For AdobeAir, Arctic Circle, Arvin, and McGraw coolersSpecify Length – 16″ – 21″ – 27″ – 30″
Visit the Order Info Page to Order!
Email For Special Quote on Very Large Quantities