Category Archives: Heating

Reznor Gas Fired Unit Heaters

Ceiling Hung Vented Gas Unit Heaters

 Reznor Unit Heater Standard Features

* Sizes 30-125 certified for residential heating application
* Sizes 30-400 certified for commercial/industrial heating application* 82-83% Thermal efficient ~ TOP in its class!
* 50-60F Rise range* 115/1/60 Supply voltage
* 115 Volt open fan motor with internal overload protection* Transformer for 24-volt controls

* Integrated circuit board with diagnostic indicator lights

* Fan relay (included on the circuit board)

* Multi-try direct spark ignition with 100% lockout

* Natural or propane single-stage gas valve
(field adjustable for operation to 9,000 ft elevation)

Above 6,000′ requires special ordered pressure switch
at additional cost

 * Vibration/noise isolated fan and venter motors
designed for low noise operation* 2-pt and 4-pt Suspension ~ standard on all sizes* External terminal strip for 24-volt wiring* External gas connection

* Full fan guard ~ engineered for safety

NEW T-CORE2 design titanium stabilized aluminized steel heat exchanger (patent pending)

NEW T-CORE2 design single burner combustion system including a one-piece burner assembly (patent pending)

Scroll for Pricing and Specifications.

Reznor Model UDAP Unit Heater
Reznor Unit Heater
45,000 Through 400,000 BTU Models
Reznor Unit Heater
Easy Access To Components
Reznor Heater Venting Outlet
Induced Draft Venting
Can be Vented
Horizontal or Vertical
Does Not Have
Fresh Air For Combustion
5 Year Warranty On Any Part
That Fails Within Five Years
No One Else Offers This Warranty To Our Knowledge
Click Below For More Information at Reznor Web Site
www.rezspec.com 

Pricing Below Is Your Cost
Price Does Not Include Shipping
Freight Cost Varies Depending on Your Location

Check out the Order Information page for how to order.

We Do Not Ship Reznor Unit Heaters via UPS
These Heaters Are Palletized To Prevent Damage
And Must Be Shipped via Common Carrier

Reznor Model UDAP Unit Heaters

~ PLEASE CONTACT US FOR ANY AVAILABLE DISCOUNTS FOR ONE OR MORE UNITS ~

Models Shown Here Are Our Normally Stocked Items24 Volt Thermostat Not Included

Natural Gas
BTU Input
Type of Control
Your Cost
Shipping Not Included 
UDAP 45
45,000
24 volt
$ 705
UDAP 60
60,000
24 volt
$ 746
UDAP 75
75,000
24 volt
$ 773
UDAP 100
100,000
24 volt
$ 887
UDAP 125
125,000
24 volt
$ 1010
UDAP 150
150,000
24 volt
$ 1,068
UDAP 175
175,000
24 volt
$ 1,189
UDAP 200
200,000
24 volt
$ 1,273
UDAP 250
250,000
24 volt
$ 1,485
#9204 Robertshaw Thermostat
24 volt
 No Longer Available
Propane Conversion Kit
NG to LPG
$ 89

Specifications for Reznor UDAP Unit Heaters

Reznor Dimensions

Model

BTU Input

Thermal
Efficiency
Dimensions
Vent
Size
Shipping
Weight
A
Height
B
Width
C
Heater Depth
D
Total Depth
UDAP 45
45,000
83%
12 1/8
26 5/8
21 9/16
26
4″
66 lbs
UDAP 60
60,000
83%
15 1/8
26 5/8
21 9/16
27
4″
74 lbs
UDAP 75
75,000
83%
15 1/8
26 5/8
21 9/16
27 5/8
4″
79 lbs
UDAP 100
100,000
83%
23 1/8
26 5/8
21 9/16
28 5/8
4″
118 lbs
UDAP 125
125,000
83%
23 1/8
26 5/8
21 9/16
29 3/8
4″
123 lbs
UDAP 150
150,000
83%
20 1/8
38 3/16
35 3/8
42
5″
204 lbs
UDAP 175
175,000
83%
20 1/8
38 3/16
35 3/8
42
5″
219 lbs
UDAP 200
200,000
83%
20 1/8
38 3/16
35 3/8
42
5″
219 lbs
UDAP 250
250,000
83%
26 1/8
38 3/16
35 3/8
42
5″
257 lbs

Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Sizes 30-125 are approved for residential application. All sizes are approved for commercial/industrial installations. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association(CSA).

Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish, unique REZNOR mitered corner and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points.  The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a”G” terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.

The preeminent new internal feature is the T-CORE2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with 100% lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high-temperature limit control. Sizes 30-125 also include a flame rollout safety switch. The operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.

Click Below For More Information at Reznor Web Site
www.rezspec.com

Cozy Gas Floor Furnaces

The Cozy Challenger Floor Furnace provides warm even heat
through the natural convection of circulating warm air

Cozy Floor Furnace Features

  • Continuous Seam Welded Combustion Chamber
    Constructed of heavy 18 gauge steel
    Maximizes heat transfer.  Factory Warranty for 10 Years.
    All Other Parts – Standard One Year Warranty

  • 100% Safety Pilot/Built-In Pressure Regulator
    Completely stops the flow of gas in the event pilot flame is extinguished.
  • Low BTU Pilot
    Constructed of stainless steel – provides maximum efficiency during standby.

  • Safety Limit Control
    Maintains lowest possible grill temperature consistent with heating required.
    Also cycles unit off in the event grill is blocked by a rug or furniture.

  • Wall Thermostat
    Standard on all models.

  • Pyrex Vision Cap
    Provides quick, safe visual check of burner and pilot operation.

  • Draft Diverter
    Prevents pilot and burner outage due to down draft.

  • Millivolt Wall Thermostat Control System
    No electricity is required to operate the unit.
    Heat is provided – even during a power failure.

  • Matchless Spark Ignition
    Eliminates need for matches or lighting tools.
Cozy Challenger Floor Furnace
Cozy Floor Furnace

Cutaway View of Cozy Floor Furnace
Spark Ignition
Matchless Spark Ignition

Click Here For Floor Furnace
Venting Information

 

The Safety Limit Control on a Cozy Floor Furnace
Offers you two settings to assure proper performance
in any winter weather

Setting No. 1
In mild weather, operate the furnace with damper open.
Furnace will cycle on and off maintaining a moderate grill temperature
and an even room temperature

Setting No. 2
In extremely cold weather, close damper
( exposes hot register warning plate )
Furnace will then put out maximum amount of heat
until room temperature reaches setting on the wall thermostat

 Scroll for Pricing  Scroll for Specifications

Click Here For Floor Furnace
Venting Information

Damper Open
Damper Closed
Pricing Below Is Your Cost
Price Does Not Include Shipping
Freight Cost Varies Depending on Your Location
Check out the Order Information page for how to order.
~ PLEASE CONTACT US FOR ANY AVAILABLE DISCOUNTS FOR ONE OR MORE UNITS ~

Cozy Floor Furnaces

Models Shown Here Are Our Normally Stocked Items

Wall Thermostat Included With Heater
Model Number
BTU Input
Ship Wgt
Your Cost
Does Not Include Shipping
90 N 30
30,000 BTU
108#
$ 928
90 N 50
50,000 BTU
126#
$ 1,020
90 N 65
65,000 BTU
152#
$ 1,173
90 N 75
75,000 BTU
181#
Discontinued
All Models Stocked in Natural Gas Only
For Propane Conversion Kit Add: $49   This Model is a Vented Heater
Venting Material Is Not Included in Pricing

Specifications

Model Number
90 N 30
90 N 50
90 N 65
90 N 75
30,000 BTU Input
50,000 BTU Input
62,000 BTU Input
75,000 BTU Input
Width & Length
14″ x 32″
22″ x 32″
24″ x 38″
26″ x 42″
Height Overall
29 1/4″
29 1/4″
29 7/8″
30 7/8″
Grille Size Overall
16″ x 34 1/8″
24″ x 34″
26″ x 40″
28″ x 44″
Size of floor opening
14 1/4″ x 32 1/4″
22 1/2″ x 32 1/2″
24 1/2″ x 38 1/2″
26 1/2″ x 42 1/2″
Gas Pipe Size at Furnace
1/2″
1/2″
1/2″
1/2″
Vent Pipe Opening
4″
4″
5″
5″
Floor to Center Line of Vent
22″
22″
22″
22 1/2″
Ship Weight
108 lbs
126 lbs
152 lbs
181 lbs

SunStar Corcho Gas Infrared Heaters

SunStar Gas Infrared Heaters

Click Here For Our Shop & Construction Site InfraRed Heaters

Click Here For Patio InfraRed Heaters

Free Shipping to the 48 Inland States
The SunStar Corcho line has been designed with many options and features including:
  • Manual & Thermostat Models
  • ODS & Flame Failure Safety Features
  • No Electricity Needed-Works Even During Power Outage
  • Wall Mount or Floor Mount, As Needed
  • Optional Blowers Available With Manual or Automatic Controls
  • Can Be Installed In Mobile Homes As Permitted By State and Local Codes
Scroll for Optional Accessories.
CK6 Infra Red Heater
CK10 Infra Red Heater
SC18 Infra Red Heater
SC30 Infra Red Heater

Scroll for Specifications              Frequently Asked Questions

Model SC 6
Model SC 10
Model SC 18
Model SC 30
Manual Only
Model SC 10 T
Model SC 18 T
Model SC 30 T
Manual
With Thermostat
Manual
With Thermostat
Manual
With Thermostat
Manual
With Thermostat
N/A
N/A
$230
$310
$257
$339
$340
$389
5 YEAR WARRANTY
When Placing An Order: Specify Type Gas To Be Used – Natural Gas or Propane
Note: The suffix “T” is used to designate thermostatically-controlled models.
6,000 BTU Model – Manual Only Available

Includes UPS Free Shipping to the 48 Inland States
Free Shipping to the 48 Inland States
We  Confirm  Your  Total  Cost  On  All  Orders  Prior  To  Shipping

Optional Accessories For SunStar Infrared Heaters

Floor Base
Blower Accessory
Optional Floor Base for Models CK6 & CK10
$36
No Optional Floor Base Needed for
Models SC 18 & SC 30
Optional Blower Accessory For Models SC18& SC30
$89
Optional Blower Not Available
For Models CK6 & CK10
ODS System
Oxygen Depletion System automatically
extinguishes flame and gas flow if oxygen
drops to unsafe levelsTEN YEAR Limited Warranty
See Actual Factory Warranty HerePUSHBUTTON IGNITER
Effortless push-button spark pilot lighter

Optional Automatic Thermostat
For comfort and fuel economy, with automatic pilot shutoff valve

Efficiency

99.9% Fuel efficient
Requires no flue and easy to install
Operates for pennies an hour
No electricity required

Optional Blower (Squirrel Cage Type)
Available as an accessory
(requires 115 volt electricity)

 

Vent Free Heaters
ARE NOT APPROVED
IN SOME AREAS OF THE
FOLLOWING STATES
California, Colorado, Massachusetts,
Minnesota, Montana, New York, Utah,
New Mexico

* Because states, counties, and municipalities adopt various codes, please check with your installer or local code officials to assure the current code in the city where you plan to install permits vent-free gas appliances.

While most states permit installation of vent-free gas heating appliances, a handful of states still prohibit residential use. Very often, that’s because a state’s building codes haven’t caught up with vent-free gas technology.
Currently seven states prohibit residential use: Alaska, Massachusetts, Montana, Minnesota *, Colorado *, Utah *, and California. However, many local and state codes are currently being revised to reflect acceptance of this new technology.
Click for map of states

* Several counties and municipalities in Colorado and Utah permit the product. Wisconsin restricts installation in homes built after 1980

 

Infrared Heating Plaque
Infrared Plaque Heaters Radiate Heat
And “Warms like the Sun”
Quickly Warms People & Objects
Before Heating The Air
Oxygen Depletion System
ODS System
Oxygen Depletion System
Cuts Off Gas & Burner
If Oxygen Falls Below Safe Levels
Sparke Ignition
Matchless Spark Ignition

Specifications

Model Number
CK-6
CK-10
SC-18
SC-30
Max BTU Input/NG
6,000
9,500
18,000
30,000
Max BTU Input/LPG
6,000
9,500
16,500
27,000
Dimensions:
Width
13″
13″
20″
23 2/3″
Depth
5 3/8″
5 3/8″
9 2/3 “
9 2/3″
Height
20 7/8″
20 7/8″
24 2/3 “
27 3/4″
Shipping Weight
13 lbs
13 lbs
24 lbs
32 lbs
Minimum Clearance from Combustible Material:
Top
36″
36″
36″
36″
Sides
6″
10″
13″
13″
Bottom ( Wall Mount)
2″
2″
2″
2″
Optional Accessories
Floor Stand
Yes
Yes
Included
Included
Blower/Fan
No
No
Yes
Yes

SunStar Construction Heating Products

Free Shipping to the 48 Inland States

RCH series

  • Ideal for construction sites, unheated work areas and supplemental heat in a large building.
  • Infrared heat when you need it, where you need it.
  • Heats people and work area directly…before heating the air.
  • No electricity is required.

Heavy Duty Infrared Heat

SunStar’s infrared construction heaters provide exceptional on-the-job versatility. These tough, reliable and job proven heaters are packed with features for both economy and rugged endurance. Built with heavy gauge steel they are designed to withstand continuous seasonal use even in severe industrial and construction type environments.

RCH100-N9A Nat Heater
RCH100-L9A LP Heater
$444.00
$444.00
Specify Type Gas to be used
Natural or Propane
Includes UPS Free Shipping to the 48 Inland States
Free Shipping to the 48 Inland States
We  Confirm  Your  Total  Cost  On  All  Orders  Prior  To  Shipping

RCH100-N9A
(nat gas w/t-stat control)RCH100-L9A
(LP gas w/t-stat control)Scroll Down for
Specifications

Typical Applications

Construction Sites Workshops
Unheated Work Areas Partially Open Buildings
Emergency Heat Thawing And Freeze Protection

Features

  • No electrical supplied
  • Lightweight for easy transportation
  • Stainless steel emitter
  • Compact 14″ diameter base
  • No moving parts
  • Optional 10 ft. hose and LP tank regulator with POL fitting available for LP units
  • Optional 15 ft. hose assembly available for natural gas units
  • 100% gas shutoff safety control

Specifications

Model Number
RCH100-N9A
RCH100-L9A
Max BTU Input/NG
100,000
Max BTU Input/LPG
95,500
Dimensions:
Height
32 1/2″
32 1/2″
Base
14″ Round
14″ Round
Shipping Weight
40 lbs
40 lbs
Area Coverage
1500-2500 sq. ft (depending on building heat loss)
Minimum Clearance from Combustible Material:
Top
54″
54″
Sides
60″
60″
Burner Pressure
3.5″ WC
10″ WC
Burner Pressure
5″ WC Minimum
14″ WC Maximum
11″ WC Minimum
14″ WC Maximum

SunStar Patio InfraRed Heaters

Free Shipping to the 48 Inland States

PH series

Enjoy Your Outdoors Longer with a
SunStar Patio Heater PATIO HEATERS

  • SunStar infrared patio heaters provide a 360-degree circle of radiant warmth.
  • No electricity is required.
  • Portable wheel kit is included.4 cup holders in
  • 4 cup holders in the base (each holds up to a 32 oz. cup).
  • Sleek design comes in stainless steel finish or black and silver texturized painted model.
  • Professional performance. Provides a powerful 40,000 Btu/hr.
  • UL listed and safety certified. Includes a flame failure safety device as standard.
  • Has weighted base to help prevent tip over and accepts a standard 20 lbs. cylinder.
  • Uniformly distributes heat in a 20′ diameter circle.
  • Convenient, matchless piezo ignition system.
PHS40-L6 Stainless Heater
PHS40-J6 Blk/Silver Heater
$459.00
$396.00
Includes UPS Free Shipping to the 48 Inland States

Free Shipping to the 48 Inland States

We  Confirm  Your  Total  Cost  On  All  Orders  Prior  To  Shipping

Specifications

I & O Instructions

Stainless Patio Heater
PHS40
Stainless Steel Model


PHJ40
Black & Silver Model

Williams Monterey Wall Heaters

Top Vented Gas Heaters For Recessed in the Wall Installation

Single Wall Cut-A-Way

35,000 btu Single Wall
Cut-A-Way View
* No Electricity Needed
Click Here to see
Actual Images of Heater

Williams Monterey Single Wall Heater
35,000 btu
Single Wall
Williams Monterey Double Wall Heater
50,000 btu
Double Wall

50,000 btu Double Wall
Cut-A-Way View
Not Certified For
Mobile Home Use

Residential Models Shown Here Are Our Normally Stocked Items
For Installation up to 4,500′ Elevation

For Use Above 4,500
High Altitude Kit – Factory Installed – Is Required
This is a “Special Ordered Heater”
At Additional $100 Cost

Monterey Heater Current Pricing

~ PLEASE CONTACT US FOR ANY AVAILABLE DISCOUNTS FOR ONE OR MORE UNITS ~

Standing Pilot Models Only

Thermostat Included With Heater

Monterey Heater Thermostats Can Be Cabinet or Wall Mounted
* No Electricity Needed

Natural Gas
Propane Gas
BTU Input
Thermostat
Ship Wgt
Your Cost
Does Not Include Shipping
2509622
2509621
25,000 Single Wall
Wall / Cabinet
83#
$541
x
3509622
3509621
35,000 Single Wall
Wall / Cabinet
83#
$582
x
5009622
5009621
50,000 Double Wall
Wall / Cabinet
137#
$751

Pricing Below Is Your Cost
Price Does Not Include Shipping
Freight Cost Varies Depending on Your Location

Check out the Order Information page for how to order.

Optional Accessories for Monterey Heaters

2901 Optional Blower Accessory
2901
6901 Optional Rear Grill
6901
2901
Blower Accessory – Standard – Mounts On Top Of Heater
Two Can Be Used For Double Wall Heater
* 115 V Electricity Needed
Installation Instructions
$122
6901
Rear Outlet Register – For Single Wall Heater Only
$35

Specifications for Monterey Heaters

Specifications
25096 Series
Single Wall
35096 Series
Single Wall
50096 Series
Double Wall
BTU Output
19,350
25,930
38,500
Previous Model Number
25 GV
35 GV
50 GV
Face Panel Dimensions
16″ x 65 3/4″ x 6″
16″ x 65 3/4″ x 6″
16″ x 65 3/4″ x 6″
Gas Connection
1/2″
1/2″
1/2″
Thermal Efficiency
77%
74%
77%
AFUE
71%
69%
71%
This Model is a Top Vent Heater
Venting Material Is Not Included in Pricing 

Rough In Dimensions

Roughin
Top View
This Model is a Top Vent Heater
Venting Material Is Not Included in Pricing
 

Williams Chamberlain Direct Vent Gas Wall Furnace

Safe For Use In Garage or Shop Heating

Also, see Reznor Unit Heater For Garage or Shop Heating

14,000 BTU Model
22,000 or 30,000 BTU Model
Residential Models & Mobile Home Models
  • Soft White Powder Coat, Scratch ResistantWilliams Direct Vent Wall Furnaces
  • Finish to Compliment any Decor
  • Direct Vent SafetyThe gas flame is completely sealed inside, away from all contact with room air.
  • Air necessary for combustion is drawn into the chamber from outside through direct wall vent, and all combustion products are vented directly to the outside.
  • No room air is used for combustionAlso has Pietzo Spark Pilot Ignition
  • Matches not necessary to light pilot.
  • No Electricity Needed
  • Venting Material Comes With Heater For up to 9″ Wall Thickness
  • Optional Vent Extension Kits Available For up to 24″ Wall Thickness
  • Must be Installed on Outside Wall This Model Clips to the Wall About 4″ Above The Floor

THIS HEATER CANNOT BE RECESSED IN THE WALL

Scroll down for Pricing, Accessories, Specifications, and Garage Heating Info.

Installation & Operating Instructions & Parts

Pricing Below Is Your Cost
Does Not Include Shipping
Residential Models Shown Here Are Our Normally Stocked Items
For Installation up to 4,500′ Elevation
For Use Above 4,500
High Altitude Kit – Factory Installed – Is Required
This is a “Special Ordered Heater”
At Additional $100 Cost

Direct Vent Residential Home Furnaces
Not Certified For Mobile Home Use

Chamberlain HeatersStanding Pilot Models Only

Standing Pilot Models Only

~ PLEASE CONTACT US FOR ANY AVAILABLE DISCOUNTS FOR ONE OR MORE UNITS ~
Free Shipping For 14,000 BTU Model Only via Regular GroundFree Shipping
Thermostat Included With Heater
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
Natural Gas
Propane Gas
BTU Input
Thermostat
Shipping
Weight
Your Cost
* Free Shipping
1403622
1403621
14,000
Wall / Cabinet
56#
$658 *

* 14,000 BTU Models Only Can Be Shipped Via FedEx Ground

Because of Physical Dimensions – 22,000 BTU & 30,000 BTU Models Below
Must Be Shipped VIA Motor Freight Carrier

Thermostat Included With Heater
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
Natural Gas
Propane Gas
BTU Input
Type of Control
Shipping
Weight
Your Cost
Shipping Not Included
2203622
2203621
22,000
Wall / Cabinet
98#
$715
3003622
3003621
30,000
Wall / Cabinet
100#
$763
Pricing Below Is Your Cost
Price Does Not Include Shipping
Freight Cost Varies Depending on Your Location
Check out the Order Information page for how to order.Venting Material Comes With Heater For up to 9″ Wall Thickness
Optional Vent Extension Kits Available For up to 24″ Wall Thickness
Special Order From Factory – Scroll Down Page For Cost
All Models Above Are Direct Vent Heaters.  They Clip Onto The wall. The Heater Vents Out The Back.
Venting  Material  Is  Included  In  Price For up to 9″ Wall Thickness

Optional Blower Accessory for Direct Vent Home Furnace

2302 Blower Accessory
2302 Blower Accessory Rear View
Optional Blower Accessory
2302 Blower Accessory Front View

 

 

Model 2302
$148
Shipping Not Included

High Capacity Blower
Comes With Fully Automatic Fan Switch
Fits Inside Casing And Is Easily Added
22,000 & 30,000 Btu Furnaces Only

115 Volt Electricity Required

Model 2303
$128
Shipping Not Included

High Capacity Blower
Comes With Fully Automatic Fan Switch
Mounts On Top Of Heater
14,000 Btu Furnace Only

115 Volt Electricity Required

Vent Extension Tubes
Optional Vent Extension Kits Available
For up to 24″ Wall Thickness Below
Special Order From Factory
9301
15″ Vent Extension for 22,000 & 30,000 BTU Furnace Only
$ 104
Free Shipping
9302
24″ Vent Extension for 22,000 BTU Furnace Only
$123
Free Shipping
9303
24″ Vent Extension for 14,000 & 30,000 BTU Furnace Only
$123
Free Shipping
9304
15″ Vent Extension for 14,000 BTUFurnace Only
$ 104
Free Shipping
Vent Shield for Vinyl Siding
4318
Vent Shield For Use With Vinyl Siding
$81
Free Shipping
Installation and operating manuals are shipped with all products purchased
Click Here For Owners Manual & Installation Instructions
Specifications for Direct Vent Home Furnaces
Click Here For Owners Manual & Installation Instructions
Specifications
14036 Series
22036 Series
30036 Series
BTU Output
10,039
16,462
21,849
Previous Model
14 DV
22 DV
30 DV
Dimensions
18″ W x 26 3/4″ H
7 1/8″ D
32 1/8″ W x 28″ H
10 1/4″ D
32 1/8″ W x 28″ H
10 1/4″ D
Gas Connection
1/2″
1/2″
1/2″
Thermal Efficiency
76%
75%
73%
AFUE
63%
67%
66%
Minimum Recommended Clearances Below
14036 Series
22036 Series
30036 Series
From Intersecting Wall
2″
2″
2″
From Top Of Heater
To Ceiling or Other
Obstruction
18″
24″
24″
 18″ From Centerline of Vent Cap Outside on All Sides

Excellent Garage or Shop Heater

No Flame is Exposed to Room Area

Garage Heater

Direct Vent Safety

For clean & comfortable heat when & where you want it.

The gas flame is completely sealed inside, away from all contact with room air.

Air necessary for combustion is drawn into the chamber from outside through direct wall vent, and all combustion products are vented directly to the outside.

Only clean gentle heat is delivered into the room.

Windows & doors can stay closed because no room air is used for combustion.

Click Here For Rough-In Dimensions

Air Circulation Pattern

 

Williams Forsaire Electric Forced Air Wall Heater Replacement Parts

Parts for Electric Forsaire Heaters

Parts Shown Here Fit Current Williams Model 3144030 Electric Forsaire Furnaces
And Older Williams Model 9.2 EF Electric Forsaire Heaters

All Motors & Parts Are of New Manufacture From Williams Furnace Company
MOTORS ARE NOT REBUILT

Replacement Motor – Fan Blade – Transformer For ELECTRIC FORSAIRE Heaters
Replacement Electric Element & Fan Relay For ELECTRIC FORSAIRE Heaters

Electric Forsaire Replacement Motor - NEW
PO 21504
New Replacement Motor230 Volt Motor
5 3/8″ Dia – 1/2″ x 2″ Shaft  $141Includes Free Shipping
Blower FanPO 14300
New Replacement Heavy Duty Blower Fan$116Includes Free Shipping
Replaces 5 Bladed Fan in older models
5 Blade Fan
Transformer & Fan Relay for Electric Forsaire Heaters
Upper Right Hand Corner of Electric Forsaire Heater

P 154802 A
240 Volt Transformer
$59

P 154700

Fan Relay
$59

Includes Free Shipping

Heating Element for Forsaire Electric Heaters
P 155001
240 voltElectric Heating Element Kit
With Isolators
$143
Includes Free Shipping
Please Note – All Parts Should Be Installed By A Qualified Heating Technician
Heating Parts CANNOT Be Returned

Direct Vent Forsaire Wall Heater Replacement Parts

Parts for Forsaire Direct Vent Heaters

Parts Shown Here Fit Current Williams Model 6257732, 6257731, 4007732, 4007731
Direct Vent Forsaire Furnaces
And Older Williams Model Direct Vent Forsaire Heaters such as 650 DVX, 350 DVX

Replacement Motor & Fan Blade For FORSAIRE Gas Fired Heaters
All Motors & Parts Are New Manufactured From Williams Furnace Company
MOTORS ARE NOT REBUILT
Replacement Motor For Forsaire Heaters
For 62,500 BTU Models Only
Pictured AbovePO 62101Two Speed New Replacement Motor
115 Volts
5 3/8″ Dia – 2-5/16″ Thick
1/2″ x 2″ Shaft

$118
Includes Free Shipping

For 62,500 BTU Models Only
Pictured Above

PO 14300 New Replacement Blower Fan
10″ Dia – 8 Blades
1/2″ dia shaft hole

$116
Includes Free Shipping

For 40,000 BTU Models Only
Below
Image Not Available
(Shown is motor image above)
Replacement Motor For Forsaire Heaters
P/N 151101 One Speed New Replacement Motor Kit
Same is PO 62101 except one speed
115 Volts
5 3/8″ Dia – 2 5/16″ Thick
1/2″ X 2″ Shaft 

$115
Includes Free Shipping

For 40,000 BTU Models Only
Fan Blade Below

Replacement Fan Blade for 40,000 btu Forsaire Heaters
P 200600 New Replacement Fan Blade
Five Blades
10 1/2″ Dia
1/2″ Shaft Hole
$83
Includes Free Shipping
Please Note – All Parts Should Be Installed By A Qualified Heating Technician
Heating Parts CANNOT Be Returned