Category Archives: Cooler Switches

Evaporative Swamp Cooler Thermostats

Visit the Order Info Page to Order!
Email For Special Quote on Very Large Quantities

* Please Note, There Is A $25 Minimum Charge PLUS S/H For Cooler Parts Orders

Installation Instructions Shipped With All Thermostats
Free shipping
Free Shipping on all Thermostats

P/N 7617 Cooler Controller ™

2 Speed 1/3 HP to 1 HP 115/230 Volt
Automatically Controls the operation of an Evaporative Cooler

P/N 7619 Cooler Thermostat
$69
Includes Free Shipping

Automatically controls the operation of the evaporative cooler.
LCD digital temperature readout with electronic temperature sensor circuitry.
Constant room temperature displayed.
Easy single touch temperature adjustment.
Case door covers operating controls
Four-minute blower start delay when using pump feature for pad wetting.
Installs in standard depth 2 x 4 single gang electrical box.

UL Listed, 1 HP, 115 VAC, 60Hz

P/N 7619 Cooler Thermostat

Thermostat Wall Plate
P/N 7616
Wall Plate
Adapts Digital Thermostat Controller to a 2 gang electrical junction box

$6

Installation Instructions Shipped With All Thermostats

P/N 7625 EZIStat Controller ™

2 Speed 1/3 HP to 1 HP 115 Volt and 230 Volt
Automatically Adjusts Motor Speed
Also Has Manual Control for 2 / 4 / 8 Hour Timer Mode

P/N 7621 EZIStat
$86
Includes Free Shipping

Automatically adjusts from High to Low speed
as the temperature approaches set point.
Optional manual control for cool (pump) and fan only
2 / 4 / 8 hour timer mode
Automatic start and stop – in “Cool” Mode only
Simple 5 wire interface
Installs in standard 2 x 4 single gang electrical box

P/N 7621 EZIStat

Thermostat Wall Plate
P/N 7616
Wall Plate
Adapts Digital Thermostat Controller to a 2 gang electrical junction box
$6

Installation Instructions Shipped With All Thermostats

P/N 7620 SELECT-A-STAT Cooler Controller ™

2 Speed 1/3 HP to 3/4 HP 115 Volt
Bimetal temperature sensing with unique heat anticipator
Line voltage thermostat & controller
Includes switches to control pump & 2-speed motor (15 amps)

P/N 7620 Select-A-Stat
 NO LONGER AVAILABLE
Automatic start & stop for temperature control
Includes separate control of high and low-speed blower motor and control of pump
Bimetallic sensing element
Includes thermostat, motor switch, pump switch, leads and installation wiring diagram
Installs easily with 4 lead wires and ground terminal
Designed for installation in single gang or double gang electrical boxes (not included)
Rated 15 amps at 115 volts VAC. UL Listed

Installation Instructions Shipped With All Thermostats

Evaporative Swamp Cooler Wall Switches

Visit the Order Info Page to Order!
Email For Special Quote on Very Large Quantities
* Please Note, There Is A $25 Minimum Charge PLUS S/H For Cooler Parts Orders
RSK 2 Wall Switch Wiring Diagram
RSK 2 Wiring Diagram

Click Here For Window Cooler Grill Switches

 

RSK 2 Rotary Wall Switch
For Side Draft And
Down Draft Coolers

(see wiring diagram on left)

Cooler Wall switch
RSK 2
$25

Note!
$25 Minimum Charge For Parts OrdersClick Here For Window Cooler Grill Switches

WARNING:
HOUSE VOLTAGE CAN BE LETHAL

1. Turn off power before installing the switch. The installer of this switch must be technically qualified for this type of installation. A qualified electrician should check all wiring and circuit breakers and be sure that the cooler installation is effectively grounded.

2. Refer to evaporative cooler installation instructions and all applicable electrical codes for correct installation of the evaporative cooler, switch and wall switch box, correct wiring procedures, and effective grounding.

3. Motor and pump voltage and amperage must not exceed switch specifications. This switch is recommended for 120-volt applications only.

4. This diagram is a basic schematic and is not intended to represent all methods of installation because of various cord, plug, and pump configurations. See evaporative cooler installation instructions and motor and pump instructions for proper motor and pump wiring. Be sure motor, pump, and cooler are properly grounded. Color coded wires must not be interchanged or interconnected with each other.

5. CAUTION: Turn the switch to “OFF” position before turning power on.

Evaporative Window Cooler Switches

Visit the Order Info Page to Order!
Email For Special Quote on Very Large Quantities
* Please Note, There Is A $25 Minimum Charge PLUS S/H For Cooler Parts Orders

Click Here For Cooler Wall Switches

Typical Wiring For
PART NUMBER 110425
FOR ALL
Champion Brand Window Cooler Switcheswiring diagram #1

Champion Window Model Wiring Diagram

Typical Wiring For

OTHER Brands Window Cooler Switches

(NOT CHAMPION BRAND)
P/N 7212 & P/N 7225

wiring diagram #2
Other Brand Window Switch Wiring

Wiring Diagrams Sent With All Switches

See Terminal Connections on Back Side
of Switches Shown on The Right
to Determine The Switch P/N
You Need

wiring diagram #3
P/N 7221 Wiring Diagram
SPECIFY P/N 110425 SWITCH
FOR ALL
CHAMPION BRAND
WINDOW MODEL COOLERS

Click Here For Wall Switches

WARNING:
HOUSE VOLTAGE CAN BE LETHAL

1. Turn off power before installing the switch. The installer of this switch must be technically qualified for this type of installation. A qualified electrician should check all wiring and circuit breakers and be sure that the cooler installation is effectively grounded.

2. Refer to evaporative cooler installation instructions and all applicable electrical codes for correct installation of the evaporative cooler, switch and wall switch box, correct wiring procedures, and effective grounding.

3. Motor and pump voltage and amperage must not exceed switch specifications. This switch is recommended for 120-volt applications only.

4. This diagram is a basic schematic and is not intended to represent all methods of installation because of various cord, plug, and pump configurations. See evaporative cooler installation instructions and motor and pump instructions for proper motor and pump wiring. Be sure motor, pump, and cooler are properly grounded. Color coded wires must not be interchanged or interconnected with each other.

5. CAUTION: Turn the switch to “OFF” position before turning power on.

Click Here For Wall Switches

 

Window Cooler Switches
Below

Chamjpion Cooler Short Stem Switch
P/N 110425
Fits Champion
Window Coolers Only
(see wiring diagram #1 on left)
$24
Cooler Switch Knobs Below

P/N 110839-006
Newer Models
Left Knob Image
Above
$8
P/N 110836
Older Models
Right Knob Image
Above
DISCONTINUED

See Below For Other Cooler Brands Switches

All Other Brands
Window Cooler Switches
Below
(see wiring diagram #2 on left)
Short & Long Stem Switch

P/N 7212
DISCONTINUED
(P2-3006-1)
Short Stem
Switch
No Longer Available 

P/N 7225
DISCONTINUED
(P2-3006-3)
Long Stem
Switch
No Longer Available 

Long Stem Switch
P/N 7271
Old
(P2-171)
DISCONTINUED
Long Stem
Switch
No Longer Available

Window Switch Knob
Switch Knob
Front View
$7

P/N 7450
Short Shank Knob
P/N 7481
Long Shank Knob
Window Switch Knob -side view
Window Switch Knob -side view
Side View of Knob

Note!
$25 Minimum Charge Plus S/H
For Parts Orders