Archives

Williams Monterey Wall Heaters

Top Vented Gas Heaters For Recessed in the Wall Installation

Single Wall Cut-A-Way

35,000 btu Single Wall
Cut-A-Way View
* No Electricity Needed
Click Here to see
Actual Images of Heater

Williams Monterey Single Wall Heater
35,000 btu
Single Wall
Williams Monterey Double Wall Heater
50,000 btu
Double Wall

50,000 btu Double Wall
Cut-A-Way View
Not Certified For
Mobile Home Use
Residential Models Shown Here Are Our Normally Stocked Items
For Installation up to 4,500′ Elevation

For Use Above 4,500
High Altitude Kit – Factory Installed – Is Required
This is a “Special Ordered Heater”
At Additional $100 Cost

Monterey Heater Current Pricing

~ PLEASE CONTACT US FOR ANY AVAILABLE DISCOUNTS FOR ONE OR MORE UNITS ~

Standing Pilot Models Only

Thermostat Included With Heater

Monterey Heater Thermostats Can Be Cabinet or Wall Mounted
* No Electricity Needed
Natural Gas
Propane Gas
BTU Input
Thermostat
Ship Wgt
Your Cost
Does Not Include Shipping
2509822
2509821
25,000 Single Wall
Wall / Cabinet
83#
$569
x
3509822
3509821
35,000 Single Wall
Wall / Cabinet
83#
$599
x
5009822
5009821
50,000 Double Wall
Wall / Cabinet
137#
$816

Pricing Below Is Your Cost
Price Does Not Include Shipping
Freight Cost Varies Depending on Your Location

Check out the Order Information page for how to order.

Optional Accessories for Monterey Heaters
2901 Optional Blower Accessory
2901
6901 Optional Rear Grill
6901
2901
Blower Accessory – Standard – Mounts On Top Of Heater
Two Can Be Used For Double Wall Heater
* 115 V Electricity Needed
Installation Instructions
$122
6901
Rear Outlet Register – For Single Wall Heater Only
$35

Specifications for Monterey Heaters
Specifications
25096 Series
Single Wall
35096 Series
Single Wall
50096 Series
Double Wall
BTU Output
19,350
25,930
38,500
Previous Model Number
25 GV
35 GV
50 GV
Face Panel Dimensions
16″ x 65 3/4″ x 6″
16″ x 65 3/4″ x 6″
16″ x 65 3/4″ x 6″
Gas Connection
1/2″
1/2″
1/2″
Thermal Efficiency
77%
74%
77%
AFUE
71%
69%
71%
This Model is a Top Vent Heater
Venting Material Is Not Included in Pricing 

Rough In Dimensions
Roughin
Top View
This Model is a Top Vent Heater
Venting Material Is Not Included in Pricing 

Williams Chamberlain Direct Vent Gas Wall Furnace

Safe For Use In Garage or Shop Heating

Also, see Reznor Unit Heater For Garage or Shop Heating

14,000 BTU Model
22,000 or 30,000 BTU Model
Residential Models & Mobile Home Models
  • Soft White Powder Coat, Scratch ResistantWilliams Direct Vent Wall Furnaces
  • Finish to Compliment any Decor
  • Direct Vent SafetyThe gas flame is completely sealed inside, away from all contact with room air.
  • Air necessary for combustion is drawn into the chamber from outside through direct wall vent, and all combustion products are vented directly to the outside.
  • No room air is used for combustionAlso has Pietzo Spark Pilot Ignition
  • Matches not necessary to light pilot.
  • No Electricity Needed
  • Venting Material Comes With Heater For up to 9″ Wall Thickness
  • Optional Vent Extension Kits Available For up to 24″ Wall Thickness
  • Must be Installed on Outside Wall This Model Clips to the Wall About 4″ Above The Floor

THIS HEATER CANNOT BE RECESSED IN THE WALL

Scroll down for Pricing, Accessories, Specifications, and Garage Heating Info.

Installation & Operating Instructions & Parts
Pricing Below Is Your Cost
Does Not Include Shipping
Residential Models Shown Here Are Our Normally Stocked Items
For Installation up to 4,500′ Elevation
For Use Above 4,500
High Altitude Kit – Factory Installed – Is Required
This is a “Special Ordered Heater”
At Additional $100 Cost

Direct Vent Residential Home Furnaces
Not Certified For Mobile Home Use

Chamberlain HeatersStanding Pilot Models Only

Standing Pilot Models Only

~ PLEASE CONTACT US FOR ANY AVAILABLE DISCOUNTS FOR ONE OR MORE UNITS ~
Free Shipping For 14,000 BTU Model Only via Regular GroundFree Shipping
Thermostat Included With Heater
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
Natural Gas
Propane Gas
BTU Input
Thermostat
Shipping
Weight
Your Cost
* Free Shipping
1403822
1403821
14,000
Wall / Cabinet
56#
$739 *

* 14,000 BTU Models Only Can Be Shipped Via FedEx Ground

Because of Physical Dimensions – 22,000 BTU & 30,000 BTU Models Below
Must Be Shipped VIA Motor Freight Carrier

Thermostat Included With Heater
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
Natural Gas
Propane Gas
BTU Input
Type of Control
Shipping
Weight
Your Cost
Shipping Not Included
2203822
2203821
22,000
Wall / Cabinet
98#
$798
3003822
3003821
30,000
Wall / Cabinet
100#
$849
Pricing Below Is Your Cost
Price Does Not Include Shipping
Freight Cost Varies Depending on Your Location
Check out the Order Information page for how to order.Venting Material Comes With Heater For up to 9″ Wall Thickness
Optional Vent Extension Kits Available For up to 24″ Wall Thickness
Special Order From Factory – Scroll Down Page For Cost
All Models Above Are Direct Vent Heaters.  They Clip Onto The wall. The Heater Vents Out The Back.
Venting  Material  Is  Included  In  Price For up to 9″ Wall Thickness

Optional Blower Accessory for Direct Vent Home Furnace
2302 Blower Accessory
2302 Blower Accessory Rear View
Optional Blower Accessory
2302 Blower Accessory Front View

 

 

Model 2302
$159
Shipping Not Included

High Capacity Blower
Comes With Fully Automatic Fan Switch
Fits Inside Casing And Is Easily Added
22,000 & 30,000 Btu Furnaces Only

115 Volt Electricity Required

Model 2303
$139
Shipping Not Included

High Capacity Blower
Comes With Fully Automatic Fan Switch
Mounts On Top Of Heater
14,000 Btu Furnace Only

115 Volt Electricity Required
Vent Extension Tubes
Optional Vent Extension Kits Available
For up to 24″ Wall Thickness Below
Special Order From Factory
9301
 15″ Vent Extension for 22,000 & 30,000 BTU Furnace Only
$ 114
Free Shipping
9302
 24″ Vent Extension for 22,000 BTU Furnace Only
$129
Free Shipping
9303
 24″ Vent Extension for 14,000 & 30,000 BTU Furnace Only
$1293
Free Shipping
9304
 15″ Vent Extension for 14,000 BTUFurnace Only
$ 114
Free Shipping
Vent Shield for Vinyl Siding
4318
 Vent Shield For Use With Vinyl Siding
$89
Free Shipping
Installation and operating manuals are shipped with all products purchased
Click Here For Owners Manual & Installation Instructions
Specifications for Direct Vent Home Furnaces
Click Here For Owners Manual & Installation Instructions
Specifications
14036 Series
22036 Series
30036 Series
BTU Output
10,039
16,462
21,849
Previous Model
14 DV
22 DV
30 DV
Dimensions
18″ W x 26 3/4″ H
7 1/8″ D
32 1/8″ W x 28″ H
10 1/4″ D
32 1/8″ W x 28″ H
10 1/4″ D
Gas Connection
1/2″
1/2″
1/2″
Thermal Efficiency
76%
75%
73%
AFUE
63%
67%
66%
Minimum Recommended Clearances Below
14036 Series
22036 Series
30036 Series
From Intersecting Wall
2″
2″
2″
From Top Of Heater
To Ceiling or Other
Obstruction
18″
24″
24″
 18″ From Centerline of Vent Cap Outside on All Sides

Excellent Garage or Shop Heater

No Flame is Exposed to Room Area

Garage Heater

Direct Vent Safety

For clean & comfortable heat when & where you want it.

The gas flame is completely sealed inside, away from all contact with room air.

Air necessary for combustion is drawn into the chamber from outside through direct wall vent, and all combustion products are vented directly to the outside.

Only clean gentle heat is delivered into the room.

Windows & doors can stay closed because no room air is used for combustion.

Click Here For Rough-In Dimensions
Air Circulation Pattern

 

Williams Forsaire Top Vented Forced Air Gas Wall Heaters

Forsaire Top Vented Wall Furnace
Blower Type Wall HeaterWilliams Top Vented Forsaire Heater
Model 6508632
(Old Model 465FX-R)Actual Color is Off White115 Volt Electricity RequiredForsaire Heaters
May be Installed
Flush Against Wall – Left Image
or
Recessed Into The Wall – Right Image
This Model is a Top Vented Heater
Venting Material
Is Not Included in the Cost
Limited Warranty 
Recessed Installation
Kalamazoo, Michigan
Forsaire Top Vent Recessed Insatallation
Replacement Motor
& Blower Fan

Residential Models Shown Here Are Our Normally Stocked Items
For Installation up to 4,500′ Elevation

For Use Above 4,500
High Altitude Kit – Factory Installed – Is Required
This is a “Special Ordered Heater”
At Additional $100 Cost

Forsaire Wall Heaters Current Pricing

~ PLEASE CONTACT US FOR ANY AVAILABLE DISCOUNTS FOR ONE OR MORE UNITS ~

Standing Pilot Models Only
Wall Thermostat Included With Heater
Natural Gas
Propane Gas
BTU Input
Type of Control
Ship Wgt
Your Cost
Shipping Not Included
3508632
3508631
35,000
24 Volt Wall Stat
90 #
$949
5008632
5008631
50,000
24 Volt Wall Stat
99 #
$1069
6508632
6508631
65,000
24 Volt Wall Stat
107 #
$1092

Pricing Below Is Your Cost
Price Does Not Include Shipping
Freight Cost Varies Depending on Your Location

Check out the Order Information page for how to order.

Optional Accessories for Forsaire Direct Vent Heaters
6702 Side Casing Grill
6702 Side Casing Grill
One & Two Way Air Diffusing Grills
6703 & 6704 Diffusing Grills
Vent Enclosure
Vent Enclosure
6702
Side Casing Grill
$35
6703
Two-Way Diffusing Grill (Snap On)
Directs Air Right & Left
$37
6704
One-Way Diffusing Grill (Snap On)
Directs Air Right OR Left
$37
6801
Rear Outlet Register w/ 10″ Boot & Damper
$64
6802
Rear Outlet Register w/ 1″ Boot & Damper
$64
9824
Vent Enclosure – 24″
$42

Specifications for Forsaire Top Vent Heaters
SpecificationsBTU Output
Previous Model Number
Height
Depth
Width
Gas Connection
Blower Speed
Thermal Efficiency
AFUE 
35087 Series28,000
435 FX
72 1/2″
10 1/4″
14 1/8″
1/2″
One
80%
75% 
50087 Series40,000
450 FX
81″
10 1/4″
14 1/8″
1/2″
Two
80%
74% 
65087 Series52,000
465 FX
87″
10 1/4″
14 1/8″
1/2″
Two
80%
74% 

Recommended Minimum Clearances Below
From Intersecting Wall
4″
From Top Of Heater
To Ceiling
4″
To Finished Floor
0″
This Model is a Top Vent Heater
Venting Material Is Not Included in Pricing

Williams Forsaire Direct Vent Forced Air Gas Wall Heaters

Excellent Garage or Shop Heater
Direct Vent Safety For Use In GarageAnd Shop Heating
No Flame Exposed to Room Area

Model 6257732
(Old Model 650 DVX-R)Actual Color is Off White

115 Volt Electricity Required

Direct Vent Forsaire Heaters
Must be Installed on Outside Wall
Flush Against Wall
or
Recessed Into The Wall

This Model is a Direct Vent Heater
Venting Material Comes With Heater
For up to 9″ Wall Thickness
Optional Vent Extension Kits Available
For up to 24″ Wall Thickness

Scroll down for Pricing, Accessories, and Specifications.
Forsaire Direct Vent Wall Furnace
Blower Type Wall Heater
Forsaire Direct Vent Wall HeaterScroll down for
Wall Venting Dimensions
Not Certified For Mobile Home Use
Residential Models Shown Here Are Our Normally Stocked Items
For Installation up to 4,500′ Elevation

For Use Above 4,500
High Altitude Kit – Factory Installed – Is Required
This is a “Special Ordered Heater”
At Additional $100 Cost

Current Pricing

~ PLEASE CONTACT US FOR ANY AVAILABLE DISCOUNTS FOR ONE OR MORE UNITS ~

Standing Pilot Models Only
Wall Thermostat Included With Heater
Natural Gas
Propane
BTU Input
Type of Control
Ship Wgt
Your Cost
Shipping Not Included
4007732
4007731
40,000
24 Volt Wall
126#
$1089
6257732
6257731
62,500
24 Volt Wall
140#
$1,159
Venting Material Comes With Heater
For up to 9″ Wall Thickness
Optional Vent Extension Kits Available
For up to 24″ Wall Thickness
Special Order From Factory – Scroll Down Page For Cost

Pricing Is Your Cost
Price Does Not Include Shipping
Freight Cost Varies Depending on Your Location

Check out the Order Information page for how to order.

Optional Accessories for Forsaire Direct Vent Heaters
6702 Side Casing Grill
6702 Side Casing Grill
One & Two Way Air Diffusing Grills
6703 & 6704 Diffusing Grills
6702
Side Casing Grill
$35
Shipping Not Included
6703
Two-Way Diffusing Grill (Snaps On Heater Air Outlet )
Directs Air Right & Left
$37
Shipping Not Included
6704
One-Way Diffusing Grill (Snaps On Heater Air Outlet )
Directs Air Right OR Left
$37
Shipping Not Included
Optional Vent Extension Tubes Available
For up to 24″ Wall Thickness Below
Special Order From Factory
9806
 Vent Tubes For Forsaire Direct Vent Furnaces – 12″ Length
$ 77
Free Shipping
9807
 Vent Tubes For Forsaire Direct Vent Furnaces – 15″ Length
NO LONGER AVAILABLE
9808
 Vent Tubes For Forsaire Direct Vent Furnaces – 24″ Length
NO LONGER AVAILABLE
 Vent Shield for Vinyl Siding

Vent Shield
Special Order From Factory
Installation Instructions
4318
 Vent Shield For Use With Vinyl Siding
$81
Free Shipping

Specifications for Forsaire Direct Vent Heaters

Specifications
6257732 Model
4007732 Model
BTU Output
50,000
32,000
Previous Model Number
625 DVX
400 DVX
Height
87″
77 3/8″
Depth
11 3/4″
11 3/4″
Width
14 1/8″
14 1/8″
Centerline of Vent to Finished Floor Line
68 1/2″
59″
Gas Connection
1/2″
1/2″
Blower Speed
Two
One
Thermal Efficiency
80%
80%
AFUE
76%
77%
Recommended Minimum Clearances Below
From Intersecting Wall
4″
From Top Of Heater
To Ceiling
4″
To Finished Floor
0″
18″ From Centerline of Vent Cap Outside on All Sides

Excellent Garage or Shop Heater

No Flame is Exposed to Room Area
Garage Heater

Direct Vent Safety

For clean and comfortable heat when and where you want it. The gas flame is completely sealed inside, away from all contact with room air. Air necessary for combustion is drawn into the chamber from outside through direct wall vent, and all combustion products are vented directly to the outside. Only clean gentle heat is delivered into the room. Windows and doors can stay closed because no room air is used for combustion.
Air Circulation Pattern

Venting Dimensions

Wall Vent Locations

Electrical Connection – Top Left
Gas Connection – Bottom Side Right

Top View & Clearances

Top View For Grill Accessories

Recommended Minimum Clearances
From Intersecting Wall
4″
From Top Of Heater
To Ceiling
4″
To Finished Floor
0″
18″ From Centerline of Vent Cap Outside on All Sides

Williams Forsaire Top Vented Forsaire Wall Heater Replacement Parts

Parts for Forsaire Top Vented Heaters

Parts Shown Here Fit Current Williams Model 6508732, 6508731, 5008732, 5008731, 3508732, 3508731
Top Vented Forsaire Furnaces

And Older Williams Model Top Vented Forsaire Heaters such as
465 FX 465 FA 650 FA, 350 FA, 650 FXR, 450 FXR
If your model number is similar to the above models, these will replace your parts

Replacement Motor & Fan Blade For FORSAIRE Top Vented Gas Fired Heaters
All Motors & Parts Are New Manufactured From Williams Furnace Company
MOTORS ARE NOT REBUILT
This motor will also fit some Wards & Sears Heaters
that were made by Williams.
If your blower looks like the one on the right,
this is the motor you need.
Replacement Motor For Forsaire Heaters
For 50,000 & 65,000 BTU Models Only
Pictured AbovePO 62101 Two Speed New Replacement Motor
115 Volts
5 3/8″ Dia – 2-5/16″ Thick
1/2″ x 2″ Shaft$169
Includes Free Shipping

For 50,000 & 65,000 BTU Models Only
Pictured Above

PO 14300-7B111

 New Replacement Blower Fan
10″ Dia – 8 Blades
1/2″ dia shaft hole

$159
Includes Free Shipping
For 35,000 BTU Top-Vent Models Only
Motor Below


P/N 7810 One Speed New Replacement Motor Kit
With Bracket
115 Volts
4 1/2″ Dia – 2 3/16″ Thick
5/16″ X 2 1/2″Shaft 

$149
Includes Free Shipping
 For 35,000 BTU Top-Vent Models Only
Fan Blade Below

Replacement Fan Blade for 40,000 btu Forsaire Heaters
P 3005 New Replacement Fan Blade
Five Blades
8 1/2″ Dia
5/16″ Shaft Hole
$89
Includes Free Shipping
Please Note – All Parts Should Be Installed By A Qualified Heating Technician
Heating Parts CANNOT Be Returned

Williams Home Hearth Gas Heaters

Vented Gas Heaters

Fireplace in a furnace

Hearth Home Heaters
Enclosed Front Models
Hearth Home Heaters
Glass Front “Fireplace Look” Models
Hearth Plain Front Heater

Velvet Black Models Without Blower
No Electricity Required
Hearth Vented Heater

Velvet Black Models With Blower
115 Volt Electricity Required
 Not Certified For Mobile Home Use
Scroll down to see Pricing, Specifications, and Venting Clearance Illustrations.
Pricing Below Is Your Cost
Does Not Include Shipping
Residential Models Shown Here Are Our Normally Stocked Items
For Installation up to 4,500′ Elevation

For Use Above 4,500
High Altitude Kit – Factory Installed – Is Required
This is a “Special Ordered Heater”
At Additional $100 Cost

Hearth Home Heaters

Current Pricing

~ PLEASE CONTACT US FOR ANY AVAILABLE DISCOUNTS FOR ONE OR MORE UNITS ~

Enclosed Front Models
No Blower – No Electricity Needed

Thermostat Included With Heater
All Hearth Heater Thermostats Can Be Cabinet or Wall Mounted
* Free Shipping on
20,000 BTU Model Only via Ground Carrier
Free Shipping
Natural Gas
Propane Gas
BTU Input
Thermostat
Ship Wgt
Your Cost
* Free Shipping
2001622
2001621
20,000 No / Blower
Wall / Cabinet
45#
$639 *

* 20,000 BTU Model Only Can Be Shipped Via FedEx Ground

Because of Physical Dimensions
35,000 & 50,000 & 65,000 Models
Cannot Be Shipped VIA UPS
They Must Be Shipped VIA Motor Freight Carrier

Enclosed Front Models
No Blower – No Electricity Needed

Thermostat Included With Heater
All Hearth Heater Thermostats Can Be Cabinet or Wall Mounted
Natural Gas
Propane Gas
BTU Input
Thermostat
Ship Wgt
Your Cost
Shipping Not Included
3501522
3501521
35,000 No / Blower
Wall / Cabinet
74#
$676
5001522
5001521
50,000 No / Blower
Wall / Cabinet
103#
$759
6501522
6501521
65,000 No / Blower
Wall / Cabinet
128#
$869

Glass Front “Fireplace Look” Models

With Blower – 115 Volt Electricity Required
Thermostat Included With Heater
All Hearth Heater Thermostats Can Be Cabinet or Wall Mounted
Natural Gas
Propane Gas
BTU Input
Thermostat
Ship Wgt
Your Cost
Shipping Not Included
3502922
3502921
35,000 w/ Blower
Wall / Cabinet
83#
$959
5002922
5002921
50,000 w/ Blower
Wall / Cabinet
112#
$1,109
6502922
6502921
65,000 w/ Blower
Wall / Cabinet
137#
$1,259
These Models Are Vented Heaters
Venting Material Is Not Included In Price
 
Installation and operating manuals are supplied with all products purchased

Specifications for Hearth Home Heaters

All Models Have Spark Ignition Pilot Lighter
Specifications
20,000 btu
Model
35,000 btu
Model
50,000 btu
Model
65,000 btu
Model
BTU Output
16,000
26,250
37,500
50,400
Dimensions
23″ W x 21 1/2″ H
15 3/8″ Depth
25″ W x 28 7/8″ H
15 3/8″ Depth
30″ W x 32 7/8″ H
16″ Depth
34″ W x 32 7/8″ H
19 3/8″ Depth
Height-Center of vent to floor
21 3/8″
21 3/8″
22 3/4″
24 3/4″
Gas Connection
1/2″
1/2″
1/2″
1/2″
Vent Size
3″
4″
4″
5″
Thermal Efficiency
80%
75%
75%
78%
AFUE
73%
68%
68%
71%
RECOMMENDED
MINIMUM CLEARANCES

MODEL
A
B
C
D
200 SERIES
2″
22″
3″
24″
350, 500 & 650 SERIES
6″
57″
6″
24″

This Model is a Vented Heater
Venting Material Is Not Included in Pricing

Although The Vent Pipe is Not Shown,
This Product Must be Vented to the Outside
Proper Venting is a Proper Sized (See Specs above)
Double Wall 90 degree Ell Off Back of
Heater And Out Through The Roof

Typical Venting Illustration
Below

 

 

 

 
Clearances
Venting Front View
Hearth Heater venting
Hearth Heater venting

 

Williams Monterey Wall Heaters – Pictures

Top Vented Gas Heaters For

Recessed in the Wall Installation

35,000 btu Single Wall
Front Grill & Body


Door at bottom of front grill

35,000 btu Single Wall
Body Mounts Between Studs
in the wall

Door pulls down to open
Note Red Knob on right
This is the spark pilot lighter

Vent Safety Switch
(Stack Switch)
at top left side



Safety Switch
(Stack Switch)
closeup view

Gas Valve
on lower left behind door
To Light Pilot
Turn Knob to Pilot Position
Push in and HOLD KNOB
Light Pilot – continue
to hold knob for 30 seconds
Then release
Turn Gas Valve Knob
To the “ON” position
for burner to operate



Serial Number
&
Model Number
Just above gas valve



Heater Vents From The Top
Out Through The Roof

Vent with 4″ OVAL
Double Wall Pipe
Fits over the oval flue opening
Rough-In Dimensions
And Top View

* No Electricity Needed

Not Certified For Mobile Home Use
This Model is a Top Vent Heater
Venting Material Is Not Included in Pricing

Rough In Dimensions
Roughin
Top View
This Model is a Top Vent Heater
Venting Material Is Not Included in Pricing

Williams Furnace Company Limited Warranty

The Manufacturer, Williams Furnace Co., warrants this wall furnace or heater to the original purchaser under the following conditions:

Limited One Year Warranty

1. Any part thereof which proves to be defective in material or workmanship within one year from date of original purchase for use will be repaired or replaced at the Manufacturer’s option, FOB it’s factory.

2. No liability is assumed by the Manufacturer for removal or installation labor costs, nor for freight or delivery charges.

Limited Extended Warranty

1. In addition to the above limited one-year warranty on the complete unit, any heat exchanger which burns out or rusts out under normal installation, use and service conditions during a period of nine years following expiration of the one-year warranty period will be exchanged for a like or functionally similar part FOB Manufacture’s factory.

2. No liability is assumed by the Manufacturer for removal or installation labor costs, nor for any freight or delivery charges.

Limitations

1. This warranty does not include any charge for labor or installation.

2. This warranty does not extend to painted surfaces nor to damage or defects resulting from accident, alteration, misuse or abuse, or improper installation.

3. This warranty does not cover claims, which do not involve defective workmanship or materials.

DUTIES OF THE CONSUMER

1. The heating equipment must be installed by a qualified installer and operated in accordance with the installation and homeowner’s instructions furnished with the equipment.

2. Any travel, diagnostic costs, service labor and labor to repair the defective unit will be the responsibility of the owner.

3. A bill of sale, cancelled check, payment records, or permit should be kept to verify purchase date to establish the warranty period.

NOTE: THIS WARRANTY IS MADE BY THE MANUFACTURE AND NOT BY K & S SALES.

K & S Sales will process the above factory warranty for any Williams products purchased from us.
Any labor or shipping costs will be the responsibility of the owner.