Rough In Dimensions & Recommended Clearances BelowUse Template Shipped With Heater To Cut Openings For Vent |
|
|
14036 Series
|
22036 & 30036 Series
|
 |
|
Archives
Williams Chamberlain Direct Vent Gas Wall Furnace
Safe For Use In Garage or Shop Heating
Also, see Reznor Unit Heater For Garage or Shop Heating
Residential Models & Mobile Home Models
- Soft White Powder Coat, Scratch Resistant
- Finish to Compliment any Decor
- Direct Vent SafetyThe gas flame is completely sealed inside, away from all contact with room air.
- Air necessary for combustion is drawn into the chamber from outside through direct wall vent, and all combustion products are vented directly to the outside.
- No room air is used for combustionAlso has Pietzo Spark Pilot Ignition
- Matches not necessary to light pilot.
- No Electricity Needed
- Venting Material Comes With Heater For up to 9″ Wall Thickness
- Optional Vent Extension Kits Available For up to 24″ Wall Thickness
- Must be Installed on Outside Wall This Model Clips to the Wall About 4″ Above The Floor
THIS HEATER CANNOT BE RECESSED IN THE WALL
Scroll down for Pricing, Accessories, Specifications, and Garage Heating Info.
Installation & Operating Instructions & Parts
|
Pricing Below Is Your Cost
Does Not Include Shipping Residential Models Shown Here Are Our Normally Stocked Items
For Installation up to 4,500′ Elevation |
High Altitude Kit – Factory Installed – Is Required This is a “Special Ordered Heater” At Additional $100 Cost |
Direct Vent Residential Home Furnaces
|
Chamberlain HeatersStanding Pilot Models Only
Standing Pilot Models Only
|
~ PLEASE CONTACT US FOR ANY AVAILABLE DISCOUNTS FOR ONE OR MORE UNITS ~
|
Free Shipping For 14,000 BTU Model Only via Regular Ground
Thermostat Included With Heater
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
|
Natural Gas
|
Propane Gas
|
BTU Input
|
Thermostat
|
Shipping
Weight |
Your Cost
* Free Shipping |
|
1403822
|
1403821
|
14,000
|
Wall / Cabinet
|
56#
|
$739 *
|
* 14,000 BTU Models Only Can Be Shipped Via FedEx Ground
Because of Physical Dimensions – 22,000 BTU & 30,000 BTU Models Below
Must Be Shipped VIA Motor Freight Carrier
Thermostat Included With Heater
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
|
Natural Gas
|
Propane Gas
|
BTU Input
|
Type of Control
|
Shipping
Weight |
Your Cost
Shipping Not Included |
|
$798
|
|||||
|
$849
|
Freight Cost Varies Depending on Your Location
Optional Vent Extension Kits Available For up to 24″ Wall Thickness
Special Order From Factory – Scroll Down Page For Cost
All Models Above Are Direct Vent Heaters. They Clip Onto The wall. The Heater Vents Out The Back.
Venting Material Is Included In Price For up to 9″ Wall Thickness
Special Order From Factory – Scroll Down Page For Cost
All Models Above Are Direct Vent Heaters. They Clip Onto The wall. The Heater Vents Out The Back.
Venting Material Is Included In Price For up to 9″ Wall Thickness
Optional Blower Accessory for Direct Vent Home Furnace |
|
 2302 Blower Accessory Rear View  2302 Blower Accessory Front View |
|
|
Model 2302 High Capacity Blower 115 Volt Electricity Required |
Model 2303 High Capacity Blower 115 Volt Electricity Required |
 |
||
|
Optional Vent Extension Kits Available
For up to 24″ Wall Thickness Below Special Order From Factory |
||
|
9301
|
15″ Vent Extension for 22,000 & 30,000 BTU Furnace Only |
$ 114
Free Shipping |
|
9302
|
24″ Vent Extension for 22,000 BTU Furnace Only |
$129
Free Shipping |
|
9303
|
24″ Vent Extension for 14,000 & 30,000 BTU Furnace Only |
$1293
Free Shipping |
|
9304
|
15″ Vent Extension for 14,000 BTUFurnace Only |
$ 114
Free Shipping |
 |
||
|
4318
|
Vent Shield For Use With Vinyl Siding |
$89
Free Shipping |
|
|
||
|
Specifications for Direct Vent Home Furnaces
Click Here For Owners Manual & Installation Instructions |
|||
7 1/8″ D |
10 1/4″ D |
10 1/4″ D |
|
|
Minimum Recommended Clearances Below
|
|||
|
From Intersecting Wall
|
2″
|
2″
|
2″
|
|
From Top Of Heater
To Ceiling or Other Obstruction |
18″
|
24″
|
24″
|
|
18″ From Centerline of Vent Cap Outside on All Sides
|
|||
|
Excellent Garage or Shop Heater No Flame is Exposed to Room Area
|
Direct Vent SafetyFor clean & comfortable heat when & where you want it. The gas flame is completely sealed inside, away from all contact with room air. Air necessary for combustion is drawn into the chamber from outside through direct wall vent, and all combustion products are vented directly to the outside. Only clean gentle heat is delivered into the room. Windows & doors can stay closed because no room air is used for combustion. |
 |