Rough In Dimensions & Recommended Clearances BelowUse Template Shipped With Heater To Cut Openings For Vent |
|
|
14036 Series
|
22036 & 30036 Series
|
 |
|
Archives
Williams Chamberlain Direct Vent Gas Wall Furnace
Safe For Use In Garage or Shop Heating
Also, see Reznor Unit Heater For Garage or Shop Heating
Residential Models & Mobile Home Models
- Soft White Powder Coat, Scratch Resistant
- Finish to Compliment any Decor
- Direct Vent SafetyThe gas flame is completely sealed inside, away from all contact with room air.
- Air necessary for combustion is drawn into the chamber from outside through direct wall vent, and all combustion products are vented directly to the outside.
- No room air is used for combustionAlso has Pietzo Spark Pilot Ignition
- Matches not necessary to light pilot.
- No Electricity Needed
- Venting Material Comes With Heater For up to 9″ Wall Thickness
- Optional Vent Extension Kits Available For up to 24″ Wall Thickness
- Must be Installed on Outside Wall This Model Clips to the Wall About 4″ Above The Floor
THIS HEATER CANNOT BE RECESSED IN THE WALL
Scroll down for Pricing, Accessories, Specifications, and Garage Heating Info.
Installation & Operating Instructions & Parts
|
Pricing Below Is Your Cost
Does Not Include Shipping Residential Models Shown Here Are Our Normally Stocked Items
For Installation up to 4,500′ Elevation |
High Altitude Kit – Factory Installed – Is Required This is a “Special Ordered Heater” At Additional $100 Cost |
Direct Vent Residential Home Furnaces
|
Chamberlain HeatersStanding Pilot Models Only
Standing Pilot Models Only
|
~ PLEASE CONTACT US FOR ANY AVAILABLE DISCOUNTS FOR ONE OR MORE UNITS ~
|
Free Shipping For 14,000 BTU Model Only via Regular Ground
Thermostat Included With Heater
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
|
Natural Gas
|
Propane Gas
|
BTU Input
|
Thermostat
|
Shipping
Weight |
Your Cost
* Free Shipping |
|
1403822
|
1403821
|
14,000
|
Wall / Cabinet
|
56#
|
$739 *
|
* 14,000 BTU Models Only Can Be Shipped Via FedEx Ground
Because of Physical Dimensions – 22,000 BTU & 30,000 BTU Models Below
Must Be Shipped VIA Motor Freight Carrier
Thermostat Included With Heater
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
All Chamberlain Heater Thermostats Can Be Cabinet or Wall Mounted
|
Natural Gas
|
Propane Gas
|
BTU Input
|
Type of Control
|
Shipping
Weight |
Your Cost
Shipping Not Included |
|
$798
|
|||||
|
$849
|
Freight Cost Varies Depending on Your Location
Optional Vent Extension Kits Available For up to 24″ Wall Thickness
Special Order From Factory – Scroll Down Page For Cost
All Models Above Are Direct Vent Heaters. They Clip Onto The wall. The Heater Vents Out The Back.
Venting Material Is Included In Price For up to 9″ Wall Thickness
Special Order From Factory – Scroll Down Page For Cost
All Models Above Are Direct Vent Heaters. They Clip Onto The wall. The Heater Vents Out The Back.
Venting Material Is Included In Price For up to 9″ Wall Thickness
Optional Blower Accessory for Direct Vent Home Furnace |
|
 2302 Blower Accessory Rear View  2302 Blower Accessory Front View |
|
|
Model 2302 High Capacity Blower 115 Volt Electricity Required |
Model 2303 High Capacity Blower 115 Volt Electricity Required |
 |
||
|
Optional Vent Extension Kits Available
For up to 24″ Wall Thickness Below Special Order From Factory |
||
|
9301
|
15″ Vent Extension for 22,000 & 30,000 BTU Furnace Only |
$ 114
Free Shipping |
|
9302
|
24″ Vent Extension for 22,000 BTU Furnace Only |
$129
Free Shipping |
|
9303
|
24″ Vent Extension for 14,000 & 30,000 BTU Furnace Only |
$1293
Free Shipping |
|
9304
|
15″ Vent Extension for 14,000 BTUFurnace Only |
$ 114
Free Shipping |
 |
||
|
4318
|
Vent Shield For Use With Vinyl Siding |
$89
Free Shipping |
|
|
||
|
Specifications for Direct Vent Home Furnaces
Click Here For Owners Manual & Installation Instructions |
|||
7 1/8″ D |
10 1/4″ D |
10 1/4″ D |
|
|
Minimum Recommended Clearances Below
|
|||
|
From Intersecting Wall
|
2″
|
2″
|
2″
|
|
From Top Of Heater
To Ceiling or Other Obstruction |
18″
|
24″
|
24″
|
|
18″ From Centerline of Vent Cap Outside on All Sides
|
|||
|
Excellent Garage or Shop Heater No Flame is Exposed to Room Area
|
Direct Vent SafetyFor clean & comfortable heat when & where you want it. The gas flame is completely sealed inside, away from all contact with room air. Air necessary for combustion is drawn into the chamber from outside through direct wall vent, and all combustion products are vented directly to the outside. Only clean gentle heat is delivered into the room. Windows & doors can stay closed because no room air is used for combustion. |
 |
Direct Vent Forsaire Wall Heater Replacement Parts
Parts for Forsaire Direct Vent Heaters
Parts Shown Here Fit Current Williams Model 6257732, 6257731, 4007732, 4007731
Direct Vent Forsaire Furnaces
And Older Williams Model Direct Vent Forsaire Heaters such as 650 DVX, 350 DVX
Replacement Motor & Fan Blade For FORSAIRE Gas Fired Heaters
All Motors & Parts Are New Manufactured From Williams Furnace Company
All Motors & Parts Are New Manufactured From Williams Furnace Company
MOTORS ARE NOT REBUILT
 For 62,500 BTU Models Only PO 62101 Two-Speed New Replacement Motor 115 Volts 5 3/8″ Dia – 2-5/16″ Thick 1/2″ x 2″ Shaft $169 |
For 62,500 BTU Models Only PO 14300-7B111 New Replacement Blower Fan $159 |
| For 40,000 BTU Models Only Below Image Not Available (Shown is motor image above) P/N 151101 One Speed New Replacement Motor Kit Same is PO 62101 except one speed 115 Volts 5 3/8″ Dia – 2 5/16″ Thick 1/2″ X 2″ Shaft $159 Includes Free Shipping |
For 40,000 BTU Models Only Fan Blade Below  P 200600 New Replacement Fan Blade Five Blades 10 1/2″ Dia 1/2″ Shaft Hole $89
Includes Free Shipping |
| Please Note – All Parts Should Be Installed By A Qualified Heating Technician Heating Parts CANNOT Be Returned |
|
Williams Forsaire Direct Vent Forced Air Gas Wall Heaters
Excellent Garage or Shop Heater
Direct Vent Safety For Use In GarageAnd Shop Heating
No Flame Exposed to Room Area
|
Model 6257732
(Old Model 650 DVX-R)Actual Color is Off White 115 Volt Electricity Required Direct Vent Forsaire Heaters This Model is a Direct Vent Heater Scroll down for Pricing, Accessories, and Specifications. |
Blower Type Wall Heater  Scroll down forWall Venting Dimensions Not Certified For Mobile Home Use |
||||||||
|
Residential Models Shown Here Are Our Normally Stocked Items
For Installation up to 4,500′ Elevation
Current Pricing
Standing Pilot Models Only |
|||||||
|
Wall Thermostat Included With Heater
|
|||||||
|
Natural Gas
|
Ship Wgt
|
Shipping Not Included |
|||||
|
4007732
|
126#
|
||||||
|
6257732
|
140#
|
||||||
|
Venting Material Comes With Heater
For up to 9″ Wall Thickness Optional Vent Extension Kits Available
For up to 24″ Wall Thickness Special Order From Factory – Scroll Down Page For Cost |
|||||||
Freight Cost Varies Depending on Your Location
Check out the Order Information page for how to order.
Optional Accessories for Forsaire Direct Vent Heaters |
|
 6702 Side Casing Grill |
 6703 & 6704 Diffusing Grills |
Shipping Not Included |
||
Directs Air Right & Left |
Shipping Not Included |
|
Directs Air Right OR Left |
Shipping Not Included |
|
|
Optional Vent Extension Tubes Available
For up to 24″ Wall Thickness Below Special Order From Factory |
||
|
9806
|
Vent Tubes For Forsaire Direct Vent Furnaces – 12″ Length |
$ 77
Free Shipping |
|
9807
|
Vent Tubes For Forsaire Direct Vent Furnaces – 15″ Length |
NO LONGER AVAILABLE
|
|
9808
|
Vent Tubes For Forsaire Direct Vent Furnaces – 24″ Length |
NO LONGER AVAILABLE
|
|
Vent Shield |
||
|
4318
|
Vent Shield For Use With Vinyl Siding |
$81
Free Shipping |
Specifications for Forsaire Direct Vent Heaters
Excellent Garage or Shop HeaterNo Flame is Exposed to Room Area |
||||||||||||||||||||||||||||||||||||||||
Direct Vent SafetyFor clean and comfortable heat when and where you want it. The gas flame is completely sealed inside, away from all contact with room air. Air necessary for combustion is drawn into the chamber from outside through direct wall vent, and all combustion products are vented directly to the outside. Only clean gentle heat is delivered into the room. Windows and doors can stay closed because no room air is used for combustion. |
 |
|||||||||||||||||||||||||||||||||||||||
Venting Dimensions
Electrical Connection – Top Left |
Top View & Clearances
|
|||||||||||||||||||||||||||||||||||||||
