Category Archives: SunStar

SunStar Corcho Gas Infrared Heaters

SunStar Gas Infrared Heaters

Click Here For Our Shop & Construction Site InfraRed Heaters

Click Here For Patio InfraRed Heaters

Free Shipping to the 48 Inland States
The SunStar Corcho line has been designed with many options and features including:
  • Manual & Thermostat Models
  • ODS & Flame Failure Safety Features
  • No Electricity Needed-Works Even During Power Outage
  • Wall Mount or Floor Mount, As Needed
  • Optional Blowers Available With Manual or Automatic Controls
  • Can Be Installed In Mobile Homes As Permitted By State and Local Codes
Scroll for Optional Accessories.
CK6 Infra Red Heater
CK10 Infra Red Heater
SC18 Infra Red Heater
SC30 Infra Red Heater

Scroll for Specifications              Frequently Asked Questions

Model SC 6
Model SC 10
Model SC 18
Model SC 30
Manual Only
Model SC 10 T
Model SC 18 T
Model SC 30 T
Manual
With Thermostat
Manual
With Thermostat
Manual
With Thermostat
Manual
With Thermostat
N/A
N/A
$230
$310
$257
$339
$340
$389
5 YEAR WARRANTY
When Placing An Order: Specify Type Gas To Be Used – Natural Gas or Propane
Note: The suffix “T” is used to designate thermostatically-controlled models.
6,000 BTU Model – Manual Only Available

Includes UPS Free Shipping to the 48 Inland States
Free Shipping to the 48 Inland States
We  Confirm  Your  Total  Cost  On  All  Orders  Prior  To  Shipping

Optional Accessories For SunStar Infrared Heaters

Floor Base
Blower Accessory
Optional Floor Base for Models CK6 & CK10
$36
No Optional Floor Base Needed for
Models SC 18 & SC 30
Optional Blower Accessory For Models SC18& SC30
$89
Optional Blower Not Available
For Models CK6 & CK10
ODS System
Oxygen Depletion System automatically
extinguishes flame and gas flow if oxygen
drops to unsafe levelsTEN YEAR Limited Warranty
See Actual Factory Warranty HerePUSHBUTTON IGNITER
Effortless push-button spark pilot lighter

Optional Automatic Thermostat
For comfort and fuel economy, with automatic pilot shutoff valve

Efficiency

99.9% Fuel efficient
Requires no flue and easy to install
Operates for pennies an hour
No electricity required

Optional Blower (Squirrel Cage Type)
Available as an accessory
(requires 115 volt electricity)

  

Vent Free Heaters
ARE NOT APPROVED
IN SOME AREAS OF THE
FOLLOWING STATES
California, Colorado, Massachusetts,
Minnesota, Montana, New York, Utah,
New Mexico

* Because states, counties, and municipalities adopt various codes, please check with your installer or local code officials to assure the current code in the city where you plan to install permits vent-free gas appliances.

While most states permit installation of vent-free gas heating appliances, a handful of states still prohibit residential use. Very often, that’s because a state’s building codes haven’t caught up with vent-free gas technology.
Currently seven states prohibit residential use: Alaska, Massachusetts, Montana, Minnesota *, Colorado *, Utah *, and California. However, many local and state codes are currently being revised to reflect acceptance of this new technology.
Click for map of states

* Several counties and municipalities in Colorado and Utah permit the product. Wisconsin restricts installation in homes built after 1980

 
Infrared Heating Plaque
Infrared Plaque Heaters Radiate Heat
And “Warms like the Sun”
Quickly Warms People & Objects
Before Heating The Air
Oxygen Depletion System
ODS System
Oxygen Depletion System
Cuts Off Gas & Burner
If Oxygen Falls Below Safe Levels
Sparke Ignition
Matchless Spark Ignition

Specifications

Model Number
CK-6
CK-10
SC-18
SC-30
Max BTU Input/NG
6,000
9,500
18,000
30,000
Max BTU Input/LPG
6,000
9,500
16,500
27,000
Dimensions:
Width
13″
13″
20″
23 2/3″
Depth
5 3/8″
5 3/8″
9 2/3 “
9 2/3″
Height
20 7/8″
20 7/8″
24 2/3 “
27 3/4″
Shipping Weight
13 lbs
13 lbs
24 lbs
32 lbs
Minimum Clearance from Combustible Material:
Top
36″
36″
36″
36″
Sides
6″
10″
13″
13″
Bottom ( Wall Mount)
2″
2″
2″
2″
Optional Accessories
Floor Stand
Yes
Yes
Included
Included
Blower/Fan
No
No
Yes
Yes

SunStar Construction Heating Products

Free Shipping to the 48 Inland States

RCH series

  • Ideal for construction sites, unheated work areas and supplemental heat in a large building.
  • Infrared heat when you need it, where you need it.
  • Heats people and work area directly…before heating the air.
  • No electricity is required.

Heavy Duty Infrared Heat

SunStar’s infrared construction heaters provide exceptional on-the-job versatility. These tough, reliable and job proven heaters are packed with features for both economy and rugged endurance. Built with heavy gauge steel they are designed to withstand continuous seasonal use even in severe industrial and construction type environments.

RCH100-N9A Nat Heater
RCH100-L9A LP Heater
$444.00
$444.00
Specify Type Gas to be used
Natural or Propane
Includes UPS Free Shipping to the 48 Inland States
Free Shipping to the 48 Inland States
We  Confirm  Your  Total  Cost  On  All  Orders  Prior  To  Shipping

RCH100-N9A
(nat gas w/t-stat control)RCH100-L9A
(LP gas w/t-stat control)Scroll Down for
Specifications

Typical Applications

Construction Sites Workshops
Unheated Work Areas Partially Open Buildings
Emergency Heat Thawing And Freeze Protection

Features
  • No electrical supplied
  • Lightweight for easy transportation
  • Stainless steel emitter
  • Compact 14″ diameter base
  • No moving parts
  • Optional 10 ft. hose and LP tank regulator with POL fitting available for LP units
  • Optional 15 ft. hose assembly available for natural gas units
  • 100% gas shutoff safety control

Specifications

Model Number
RCH100-N9A
RCH100-L9A
Max BTU Input/NG
100,000
Max BTU Input/LPG
95,500
Dimensions:
Height
32 1/2″
32 1/2″
Base
14″ Round
14″ Round
Shipping Weight
40 lbs
40 lbs
Area Coverage
 1500-2500 sq. ft (depending on building heat loss)
Minimum Clearance from Combustible Material:
Top
54″
54″
Sides
60″
60″
Burner Pressure
3.5″ WC
10″ WC
Burner Pressure
5″ WC Minimum
14″ WC Maximum
11″ WC Minimum
14″ WC Maximum

SunStar Patio InfraRed Heaters

Free Shipping to the 48 Inland States

PH series

Enjoy Your Outdoors Longer with a
SunStar Patio Heater PATIO HEATERS

  • SunStar infrared patio heaters provide a 360-degree circle of radiant warmth.
  • No electricity is required.
  • Portable wheel kit is included.4 cup holders in
  • 4 cup holders in the base (each holds up to a 32 oz. cup).
  • Sleek design comes in stainless steel finish or black and silver texturized painted model.
  • Professional performance. Provides a powerful 40,000 Btu/hr.
  • UL listed and safety certified. Includes a flame failure safety device as standard.
  • Has weighted base to help prevent tip over and accepts a standard 20 lbs. cylinder.
  • Uniformly distributes heat in a 20′ diameter circle.
  • Convenient, matchless piezo ignition system.
PHS40-L6 Stainless Heater
PHS40-J6 Blk/Silver Heater
$459.00
$396.00
Includes UPS Free Shipping to the 48 Inland States

Free Shipping to the 48 Inland States

We  Confirm  Your  Total  Cost  On  All  Orders  Prior  To  Shipping

Specifications

I & O Instructions

Stainless Patio Heater
PHS40
Stainless Steel Model


PHJ40
Black & Silver Model