Ceiling Hung Vented Gas Unit Heaters

Reznor Unit Heater Standard Features * Sizes 30-125 certified for residential heating application * Sizes 30-400 certified for commercial/industrial heating application* 82-83% Thermal efficient ~ TOP in its class! * 50-60F Rise range* 115/1/60 Supply voltage * 115 Volt open fan motor with internal overload protection* Transformer for 24-volt controls* Integrated circuit board with diagnostic indicator lights * Fan relay (included on the circuit board) * Multi-try direct spark ignition with 100% lockout * Natural or propane single-stage gas valve (field adjustable for operation to 9,000 ft elevation) Above 6,000′ requires special ordered pressure switch at additional cost  * Vibration/noise isolated fan and venter motors designed for low noise operation* 2-pt and 4-pt Suspension ~ standard on all sizes* External terminal strip for 24-volt wiring* External gas connection* Full fan guard ~ engineered for safety NEW T-CORE2 design titanium stabilized aluminized steel heat exchanger (patent pending) NEW T-CORE2 design single burner combustion system including a one-piece burner assembly (patent pending) Scroll for Pricing and Specifications.

Reznor Model UDAP Unit Heater 45,000 Through 400,000 BTU ModelsEasy Access To ComponentsInduced Draft Venting Can be Vented Horizontal or VerticalDoes Not Have Fresh Air For Combustion5 Year Warranty On Any Part That Fails Within Five Years No One Else Offers This Warranty To Our KnowledgeClick Below For More Information at Reznor Web Site www.rezspec.com

Check out the Order Information page for how to order.

Specifications for Reznor UDAP Unit Heaters

Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Sizes 30-125 are approved for residential application. All sizes are approved for commercial/industrial installations. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association(CSA).

Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish, unique REZNOR mitered corner and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points.  The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a”G” terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.

The preeminent new internal feature is the T-CORE2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with 100% lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high-temperature limit control. Sizes 30-125 also include a flame rollout safety switch. The operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.

Click Below For More Information at Reznor Web Site
www.rezspec.com